In order to ensure the normal operation of the main thread rod end bearing, the operation will be based on the request of the mainframe and the bearing design theory and application experience, effectively setting a maintenance cycle and regular maintenance. , shutdown inspection and maintenance.
During the operation of the internally threaded rod end bearing, there must be phenomena such as sound, temperature and vibration. Therefore, regarding the maintenance and maintenance of the bearing in operation, the abnormal change of the bearing can be found through the methods of listening, touching, observing, and using a bearing fault diagnosis instrument, and the rod end joint bearing can be judged to be in a normal working state according to the changed state.
The internal threaded rod end bearing needs skilled operation skills. When the product is taken out from the heating tank or the heater, immediately wipe the oil traces and attachments on the surface of the joint bearing with a clean cloth. Cotton yarn), then placed in front of the mating surface, pushing the joint bearing against the shoulder in one operation. Always tighten during the cooling process or tap the joint bearing with a small hammer through the fitting sleeve to make it tight. When installing the end rod joint bearing, the joint bearing should be slightly rotated to avoid the installation from tipping or jamming.