Home > Exhibition > Content
Moment requirements and installation of stainless steel ball joint rod ends
Jul 11, 2018

The bending moment of the stainless steel ball joint rod end during the operation can make the bending moment of the beam bottom be a positive bending moment, so that the bending moment of the upper part of the beam or the beam surface is a negative bending moment. The positive sign of the bending moment of the column section is determined by the direction around the mandrel, which is positive clockwise and negative counterclockwise.

The solid end bending moment of the stainless steel ball joint rod end belongs to the bending moment, and the bending moment of the solid end of the stainless steel ball joint is the temperature of the rod end joint bearing because it receives one or a plurality of fixed joint constraints (ie, just connected). The temperature of the outer surface of the rod end joint bearing can be inferred. If the oil hole can directly measure the outer ring temperature of the rod end joint bearing, it is more suitable.

The temperature of the stainless steel ball joint rod end will effectively increase with the joint bearing of the rod end, and reach a steady state after 1-2 hours. If the lubrication and installation parts are suitable, the rod end joint bearing temperature will rise sharply. An abnormally high temperature will occur, and it is necessary to stop the operation and take necessary precautions.

http://www.wxjwbearing.com/


Products List