The rod end joint bearing is a joint bearing equipped with rod end or mounted on the rod end, it belongs to a class of joint bearing. Joint bearing is a spherical plain bearing, and is basically made up of an inner ring and outer ring with spherical sliding contact surface. Joint bearing is...
As the name suggests, the angular contact spherical sliding bearing has a spherical sliding surface and forms an angle with the bearing shaft. Therefore, this type of bearing is particularly suitable for carrying combined (radial and axial) loads. Single angular contact spherical plain bearings can only withstand axial loads in one direction. These bearings can be separated so that the ferrule can be mounted separately. As a standard, we manufacture maintenance-free angular contact spherical plain bearings using a combination of stainless steel and PTFE FRP (fiber-reinforced polymer with PTFE) sliding contact surfaces. The design of other sliding contact surface combinations can be provided as needed.
Housing- 300 Series Stainless Steel.
Race:Brass lined with Teflon*
Ball- 440 C Stainless Steel.Hardened. Hard Chrome Plated.
2).Do not scale drawing.
3).Unless otherwise specified. all dims are in mm.
4).Breakaway torque for ball must be≤ 500 oz-in.