These heim joint rod ends bearings can be used to withstand light or medium loads, carburized steel or bainite quenched bearings that withstand shock and vibration loads.
These heim joint rod ends bearings can be used to withstand light or medium loads, carburized steel or bainite quenched bearings that withstand shock and vibration loads. Its elastic deformation is small and can be ignored in most machines. It can also achieve the purpose of increasing the rigidity of the support by pre-tightening.
This kind of heim joint rod ends bearing is widely used in various fields of miniature motors, electric toys, fitness equipment, telecommunications equipment, instrumentation, computers, motors, medical equipment and so on.
CM: (race: steel) (Cases: CM2, CML2)
Operating temperature range: steel to steel, steel to PTFE composite, steel to PTFE braid -50 ° C ~ +150 ° C, with sealing ring -30 ° C ~ +130 ° C. At higher temperatures, the service life of the bearing will decrease.
CF (racesteel) (CF2, CFL2)
A - Bafl 1.0.; B - Ball Dia.
The heated temperature of the heim joint rod ends bearing must never exceed +280 °C (+535 °F) because it contains Teflon. Teflon is completely unaffected at this temperature, but if the temperature is around 320 °C (605 °F), Teflon will decompose rapidly. Decomposition of released fluorine, even in small quantities, is extremely dangerous and can cause serious injury. It should also be noted that once the material is overheated, it is still very dangerous even after cooling. Wear heat-resistant gloves when handling high temperature parts.
Users need to pay attention to the service life of the product in use, and do positive and work in the use, and do a variety of cleaning work, which can help the effective life of the product and help everyone to better production.