Metric Spherical Bearings consist of an inner ring with a convex spherical outer surface and an outer ring with a corresponding concave spherical inner surface.
Metric Spherical Bearings consist of an inner ring with a convex spherical outer surface and an outer ring with a corresponding concave spherical inner surface. This design is particularly suitable for bearing configurations in the following conditions: must be able to adjust the alignment deviation between the shaft and the bearing seat, or must be able to reciprocate or periodically swing or rotate at a relatively slow sliding speed.
Our products meet the needs of everything from normal precision to high precision, normal load to heavy load, general environment to corrosive environment and low temperature, room temperature to high temperature. It is made of high-strength fiber woven PTFE self-lubricating material with bonding technology. It has high wear resistance and is suitable for heavy load or high wear and oil-free lubrication. It is widely welcomed by metric users.
Metric Spherical Bearings are made of high quality carbon steel.
Self-lubricating, wear resistance, self-aligning and low friction.
It can bear a radial heavy load and a mechanical mechanism with not big axial load in any direction.
Steel ball joint rod ends（XCOM-03)
Race- Low Carbon Steel,
Plated Zinc/Clear or Silver
Liner- Nylon type 6/6 or 6/12
40% long glass. with 5%
Ball- Low Carbon Steel,
Hard Chrome Plated
2). Do not scale drawing.
3). Unless otherwise specified,all dims are in inches.
4). All dimensions apply after plating.
Plating must withstand 96hr of salt spray test per ASTM B117 without any visible red rust.
Pre-sales: recommend suitable types, provide non-bid price processing, and customize and provide samples according to customer's requirements.
Carry out production in strict accordance with international standards and enterprise standards.
Timely communicate with customers and keep continuous improvement.