Home > Exhibition > Content
Stainless steel rod ends packaging and storage tips
Mar 21, 2018

The stainless steel rod end is a special type of bearing product. Because of its particularity, it is necessary to be careful when packing it to ensure the integrity of the stainless steel rod end. What about the packaging and storage of stainless steel rods at the factory?

 

Since stainless steel rod ends have been packaged after anti-rust treatment, do not open the package until immediately before installation. And because the rust-proof oil coated on the stainless steel rod end has good lubrication performance, the stainless steel rod end for general purpose can be used without cleaning; but for the instrument bearing or the stainless steel rod end for high-speed rotation, the application of clean cleaning The oil will be washed off anti-rust oil.

 

The cleaning agent commonly used for stainless steel rod ends is neutral water-free diesel oil or kerosene, and mild alkali liquor is sometimes used as necessary. No matter which type of cleaning agent is used, it should always be filtered and kept clean so as to effectively clean the stainless steel rod end.

 

However, at the same time, the cleaned stainless steel rod end is also prone to rust, so it can not be placed for a long time. Stainless steel rod ends have been coated with an appropriate amount of anti-rust oil and are packaged in rust-proof paper. Therefore, as long as the packaging is not damaged, the quality of the stainless steel rod ends will be guaranteed.

 

When the stainless steel rod end is stored for a long period of time, it is advisable to store it on a shelf higher than 30 cm above the ground at a humidity of less than 65% and a temperature of about 20°C. In addition, stainless steel rod end storage locations should avoid direct sunlight or contact with cold walls.

 

http://www.wxjwbearing.com/


Products List